rock-crusher Nes>>com_news>>Yifan Machinery achievements rock crusher innovation and development (b ) - rock crusher base

Crusher Plant
About Rock Crusher PF Series Rock Crusher is a new product that absorbs advanced technologies at home and abroad.This Series equipment can crusher material which max...
More
HOW TO WORK PF Series Rock Crusher use impact energy to crush materials. When the Rock Crusher works, the motor drives the rotor rotate of the Rock Crusher with high speed.
More
Successful Case

Yifan Machinery achievements rock crusher innovation and development (b ) - rock crusher base

Front Yifan Machinery for everyone to share " Yifan Machinery achievements rock crusher innovation and development of (a) - the performance of the rock crusher and rock crushing machine . " Yifan Machinery of this section continue to share " the innovation and development of Yifan Machinery achievements rock crusher (b) - the installation of the rock crusher rock crusher production and operation precautions . "

Rock crusher installation method :
(1) Rock crusher equipment should be installed at the level of the concrete foundation , and fixed to the bolt .
(2) The rock crusher installation should be noted that the host body and the vertical and horizontal .
(3) To check the installation of the rock crusher part of the bolt is loose , and to strengthen host Kurakado whether to tighten .
(4) According to the device configuration of the power cord and power control switch .
(5) The check is completed, the empty load test , test , production may be normal .

Rock crusher operating procedures :
(1) Check whether the institution to close the doors of the machine before the start of machine operation is strictly prohibited to open the door to prevent danger .
(2) The crusher must be empty to start , in normal operation, under the purpose of production .
(3) Into feed particle size , the General Assembly has resulted in equipment damage and low output .
(4) Results show that the abort , stop checking , problem solving , and then used in the production .
(5) Lubricant on a regular basis , rotating bearing parts .

The rock crusher production note:
(1) Normal operation of the rock crusher can be put into the rock crushing operations ;

(2) Broken rock should be uniform to join the crusher cavity should avoid lateral feeding or feeding filled in order to avoid unilateral overload or under overload .

(3) In normal operation, the bearing temperature rise should not be more than 30 ° C , the maximum temperature should not exceed 70 ° C . Over the above temperature , should be immediately stopped , identify the cause and to be eliminated .

(4) Before stopping , you should first stop feeding until the crushing cavity of the rock is completely discharged before turn off the power .

(5) Broken , as a result of the crushing cavity rocks blocking caused by parking , they should immediately turn off the power to stop the run will be broken cavity rock clean up after, before again starting .

(6) One end of the jaw plate wear , you can turn around . The rock crusher is used for a period of time should adapter sleeve is loose and damage the machine .
Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail:yifanseo@yfmac.com
Tel: +86-371-64966831 Fax: +86-371-64628872
The article by rock crusher,rock crushing plant Yifan Machinery Editor: http://www.rock-crusher.org/ , please indicate the source , little effort , thank you .

Crusher Plant Case
Contact Us
  • Tel:+86-371-64966831
  • Fax:+86-371-64628872
  • E-mail:yifanseo@yfmac.com
  • Msn:yifancrusher@yahoo.cn
Copyrigh©2009,Yifan Rock Crusher.
Address:Zhengyuan Rd,Xingyang,ZhengZhou Henan 450100,China.
Welcome to the the YIFAN mechanical rock crusher machinery net
--wumi